A site (IfcSite) may include a definition of the single geographic reference point for this site (global position using Longitude, Latitude and Elevation) for the project. This definition is given for informational purposes only; it is not intended to provide an absolute placement in relation to the real world.

The geometrical placement of the site, defined by the IfcLocalPlacement, shall be always relative to the spatial structure element, in which this site is included, or absolute, i.e. to the world coordinate system, as established by the geometric representation context of the project.

A project may span over several connected or disconnected sites. Therefore site complex provides for a collection of sites included in a project. A site can also be decomposed in parts, where each part defines a site section. This is defined by the composition type attribute of the supertype IfcSpatialStructureElements which is interpreted as follow:

• COMPLEX = site complex
• ELEMENT = site
• PARTIAL = site section

The quantities relating to the site are defined by the IfcElementQuantity and attached by the IfcRelAssignsProperties. The following quantities are foreseen, but will be subjected to the local standard of measurement:

HISTORY: New entity in IFC Release 1.0.

Geometry Use Definitions

The geometric representation of IfcSite is given by the IfcProductDefinitionShape and IfcLocalPlacement allowing multiple geometric representations.

Local placement

The local placement for IfcSite is defined in its supertype IfcProduct. It is defined by the IfcLocalPlacement, which defines the local coordinate system that is referenced by all geometric representations.

• The PlacementRelTo relationship of IfcLocalPlacement shall point to the IfcSpatialStructureElement of type "IfcSite", if relative placement is used (e.g. to position a site relative a a site complex, or a site section to a site).
• If the relative placement is not used, the absolute placement is defined within the world coordinate system. If there is only one site object, then this is the default situation.

Foot Print Representation

The foot print representation of IfcSite is given by either a single 2D curve (such as IfcPolyline or IfcCompositeCurve), or by a list of 2D curves (in case of inner boundaries).

The representation identifier and type of this geometric representation of IfcSite is:

• IfcShapeRepresentation.RepresentationIdentifier = 'FootPrint'
• IfcShapeRepresentation.RepresentationType = 'Curve2D' or 'GeometricCurveSet'

Survey Points Representation

The survey point representation of IfcSite is defined using a set of survey points and optionally breaklines. The breaklines are restricted to only connect points given in the set of survey points. Breaklines, if given, are used to constrain the triangulation.

The representation identifier and type of this geometric representation of IfcSite is:

• IfcShapeRepresentation.RepresentationIdentifier = 'SurveyPoints'
• IfcShapeRepresentation.RepresentationType = 'GeometricSet'

	A set of survey points, given as 3D Cartesian points within the object coordinate system of the site. The set of IfcCartesianPoint is included in the set of IfcGeometricSet.Elements.
	result after facetation
	A set of survey points, given as 3D Cartesian points, and a set of break points, given as a set of lines, connecting some survey points, within the object coordinate system of the site. The set of IfcCartesianPoint and the set of IfcPolyline are included in the set of IfcGeometricSet.Elements.
	result after facetation taking the breaklines into account.

Note: The geometric representation of the site has been based on the ARM level description of the site_shape_representation given within the ISO 10303-225 "Building Elements using explicit shape representation".

Facetation Representation

The facetation representation of IfcSite is defined using a surface model, based on the IfcFaceBasedSurfaceModel or on the IfcShellBasedSurfaceModel. Normally the surface model is the result after triangulation of the site survey points.

The representation identifier and type of this representation of IfcSite is:

• IfcShapeRepresentation.RepresentationIdentifier = 'Facetation'
• IfcShapeRepresentation.RepresentationType = 'SurfaceModel'

Body Representation

The body (or solid model) representation of IfcSite is defined using a faceted boundary representation based on the IfcFacetedBrep or on the IfcFacetedBrepWithVoids.

The representation identifier and type of this representation of IfcSite is:

• IfcShapeRepresentation.RepresentationIdentifier = 'Body'
• IfcShapeRepresentation.RepresentationType = 'Brep'